Mimaki CG SR lll Philippines

Introducing the Mimaki CG - SR lll Series
Best in Class Industrial Cutter Available at Tees and Prints Enterprise

Before : P120,000.00
Now    : P80,000.00

CG-SR III Series: Extreme Curve Cutting Speed

With a host of technical improvements over previous cutters, Mimaki’s new CG-SR III range of cutting plotters features a 60 cm wide desktop model up to a 137 cm wide professional production unit. All with the capability to cut to a wider range of substrates and applications at higher speeds that ever before. By delivering a practical and cost effective solution for every sign and graphics need, the highest possible return on your investment is assured.

CG-SR III Series delivers •••

• Wider Roll cutting format for professional use
• Stunning value & highly competitive performance
• 3 different cutting widths available (606/1070/1370 mm)
• Up to 70 cm/s cutting speed
• Fast and accurate contour cutting
• Best-in-class cutting pressure of up to 500g
• Half-cut function holds image in place after cutting for perfect stickers and decals

Features of CG-SR III Series

High speed continuous register mark detection

For precise contour cutting of printed images, such as stickers, the optical sensor detects register marks that are printed on the media. By recognizing these marks, the distance to the image is calculated accurately.

By continuously detecting a maximum of 4 register marks nested images in both X and Y axis direction can be cut aligning each image automatically. Detecting one register mark is sufficient when using Mimaki’s FineCut software.

---

Innovative Mimaki Half-Cut function

A = Die cut
(through cut)
B = Half cut
(cut through half the media)

Mimaki’s original Half-Cut function produces a series of half and die-cuts leaving a few connection points that keeps the image in place. When the job is done the sticker/image can be taken out easily or the complete sheet or roll can be sent to the customer. Various media without backing sheet can also be Half-Cut.

---

Intermediate crop marks can be made by Finecut

Segment correction function

This function detects intermediate crop marks,  enabling four-point corrections for each segment. This facility ensures accurate contour cutting over longer length prints, even if the image becomes distorted.

---

Remote monitoring capability

Machines use an Event Notification Function to send information to pre-set e-mail addresses about completion of cutting task or errors in production, thereby enabling unattended operation and improving productivity.

Prev

Specifications of CG SR III Series

Item		CG-60SRIII	CG-100SRIII	CG-130SRIII
Acceptable sheet width		90~740 mm	90~1,250 mm	90~1,550 mm
Effective cutting area		606 mm	1,070 mm	1.370 mm
Maximum speed		Cutting: 70 cm/s, Moving: 100 cm/s
Adjustable speed range		1 – 10 cm/s (1 cm/s step adjustment), 1 – 70 cm/s (5 cm/s step adjustment)
Mechanical resolution		X direction: 2.5 μmˎY direction: 5 μm
Command resolution		25 μm or 10μm (MGL-IIc) / 100 μm, 50 μm (MGL-Ic1)
Repeatability*1		± 0.2 mm / 2 M
Effective Repeatability*2		586 mm × 2 M	1,050 mm × 2M	1.350 mm × 2M
Maximum pressure		500g
Range ofdown pressure	Cutter	10 – 20 g(2 g step), 20 – 100 g(5 g step), 100 – 500g(10g step)
	Pen	10 – 20 g(2 g step), 20 – 100 g(5 g step), 100 – 150g(10 g step)
Acceptable sheet*2		Vinyl sheet, Fluorescent type vinyl sheet, Reflective sheet, Rubber sheet
Acceptable tool*3		Cutter, Ball-point pen
Type of command		MGL-IIC / MGL-Ic1
Interface		USB2.0ˎRS-232CˎEthernet
Receiver buffer size		27 MB Standard (When sorting, 17 MB)
Operational environment		5 – 35 ºC, 35 – 75 %(Rh), Non-condensation
Power requirement		AC 100 V – 240 V, 145 VA or less
Dimensions (W x D x H)		1,030 × 430 × 335 mm (1,030 × 430 × 1,185 mm)*4	1,530 × 580 × 1,150 mm	1,830 × 580 × 1,150 mm
Weight		24kg	41kg	46kg
Stand		Optional equipment	Standard equipment	Standard equipment

Applications of the CG-SR III Series

Stickers, Labels, Decals, Graphics and Signage, with the added benefit of ‘half-cut’ and ‘over-cut’ functions. As well as fold lines for PoP applications making the finished items even easier
to apply and more professional looking …

Suitable Cutting Materials

(Coloured) vinyl, transparent PET, (transfer) paper, flock, rubber.

http://www.mimakieurope.com/products/cutting-plotters/cg-sr-3-series/